User Tools

Site Tools


This is an old revision of the document!

IRIG 106 Sample Data Files


The data files below are samples of actual recorded Chapter 10 data. Be warned, though, that in general they provide examples of varying degrees of Chapter 10 compliance. See the summary page for each data file for further descriptions and notes.

Sample Chapter 10 Data Files

Name Size Brief Description
Files From Industry Day
Calculex-PCM20_12052009_212115 4 MB Calculex Time, IRIG-B, 20Mbps PCM
Calculex-PCM10_12052009_211910 2 MB Calculex Time, IRIG-B, 10Mbps PCM
Calculex-PCM5_12052009_211602 1 MB Calculex Time, IRIG-B, 5 Mbps PCM
Calculex-PCM200_12052009_212313 56 kB Calculex Time, IRIG-B, 200Kbps PCM
Calculex-Video-Voice_12052009_221628 31 MB Calculex Video, MPEG 5Mbps, Left and Right Audio, Analog NTSC
Enertec_12042009_19040920 270 MB Enertec video and 1553
Heim-D200-1_06042008_12332100 313 MB Heim PCM, Video, Analog, and UART
Heim-GSS-1_00970000_09030600 153 MB Heim PCM, 1553, Video, Analog, UART, Ethernet, and ARINC 429
JDA-Systems_17042009_2053024 363 MB JDA Systems PCM channels with METS data
Sypris_21042009_210227 156 MB Sypris two analog channels and four PCM channels
TTC-1553_107_132248 653 kB 8 1553 channels with METS data
TTC-ARINC-429_110_194626 218 kB 1 ARINC 429 channel
TTC-Golden_01052009_212145 164 MB Indexed, Events, Ethernet x 1, PCM x 4, Video x 1
Wideband-Systems-2100_30042009_005127 61 MB Wideband Systems PCM channels with METS data
Wideband-Systems_01052009 61 MB Wideband Systems Analog and PCM channels with METS data
Wyle_24042009_15425242 43 MB Wyle 4 streams PCM, 2 Analog, 1553, enet, video
Wyle-Ethernet_14052009_15324323 5 MB Wyle Time and Ethernet
Other Files
NCCTD 296 kB Data file segmented into many small data files

Submitting a Sample Data File

Data files can be submitted for inclusion in this list. Please limit the size of summitted files to something reasonable. A 1 GB file isn't required to demonstrate four channels of 1553. Try to limit your submissions to only those data files that uniquely demonstrate some aspect of IRIG 106. Don't submit ten data files that basically have the same kind of data.

When submitting a file, be prepared to provide as much of the following information as possible:

  • Data File Summary Description
  • Recorder Vendor
  • Recorder Type
  • Recorder Firmware rev
  • Chapter 10 Version (as reported in the setup record CSDW)
  • Chapter 9 Version (as reported in the TMATS G\106 field)
  • Per Channel Description (Ch 10 = F-16 A-MUX SKU 6, etc.)
  • Known issues (e.g. errors reported by a validator)
  • Releasability restrictions
  • Creation Date
  • Point of Contact

To submit a file do the following:

  1. Download the Readme Template and fill in as much information as possible.
  2. Create a ZIP file with the readme text file and the data file(s).
  3. Upload the ZIP file via ftp to The Username is “ftpdata” and the Password is “ftpdata”. For security, once you upload a file you will not be able to download again via ftp. You'll need to go through this web page. If you need an FTP client, I recommend FireFTP for Firefox.
  4. Send an email to bob.samples (at) to let me know you have a file ready for sharing. I'll review it, write up a summary web page, and make it available.


Manoj , 2018/12/24 01:04, 2019/02/28 09:24

Please share the user ID & password to download the Vendor Data File Samples

Bob, 2018/12/24 16:21

See instructions on this page.

You could leave a comment if you were logged in.
sample_data_files.1542822193.txt.gz · Last modified: 2018/11/21 11:43 by bob