ch10_handbook:conformance_to_irig_106
~~ODT~~
CONFORMANCE TO IRIG 106
Chapter 10 of the IRIG 106 standard sets forth requirements for digital recorders. Paragraph 10.3.1 summarizes requirements for a recorder to be considered 100 percent compliant with the standard. A number of features described in Chapter 10 are considered optional. Optional features are not required to be implemented; however, if they are implemented, they must be in accordance with the Chapter 10 standard.
Rather than reiterate all the requirements of Chapter 10, the tables below present a brief outline of the major requirement areas, as well as those portions of Chapter 10 that have been identified as optional.
| PHYSICAL INTERFACE REQUIREMENTS | |||
|---|---|---|---|
| Ch 10 Section | Required | Optional | Physical Interfaces |
| 10.3, 10.4.1 | See Note | Recorder Fibre Channel | |
| 10.4.2 | ✔ | - Fibre Channel SCSI | |
| 10.4.1 | ✔ | - Data Download | |
| 10.3.11 | ✔ | - Data streaming | |
| 10.3.8, 10.7 | ✔ | - Configuration with TMATS | |
| 10.7.1 | ✔ | - Recorder Control and Status | |
| 10.4.2 | See Note | Recorder IEEE 1394B | |
| 10.4.2.2 | ✔ | - SCSI/SBP-2 | |
| 10.4, 10.9 | ✔ | - Data Download | |
| 10.3.11 | ✔ | - Data streaming | |
| 10.3.8, 10.7 | ✔ | - Configuration with TMATS | |
| 10.7.1 | ✔ | - Recorder control and status | |
| 10.4, 10.4.3 | See Note | Recorder Ethernet (on board) | |
| 10.4 | ✔ | - Data Download | |
| 10.3.11 | ✔ | - Data streaming | |
| 10.3.8, 10.7 | ✔ | - Configuration with TMATS | |
| 10.7.1 | ✔ | - Recorder Control And Status | |
| 10.3.5, 10.3.6 | ✔ | Removable Memory Media (RMM) | |
| 10.9.5 | - IEEE 1394B Bilingual Socket | ||
| 10.9 | ✔ | - IEEE 1394B SCSI/SBP-2 | |
| 10.4, 10.9 | ✔ | - Data Download | |
| 10.3.8, 10.7 | ✔ | - Configuration with TMATS | |
| 10.3.2, 10.7.10 | ✔ | Discrete Lines | |
| 10.7.10 | ✔ | - Recorder control and status | |
| 10.3.2 | ✔ | RS-232 and 422 Full Duplex Communication | |
| 10.7 | ✔ | - Configuration with TMATS | |
| 10.7 | ✔ | - Recorder Control And Status | |
| 10.3 | ✔ | External Power Port | |
| Note: Either Fibre Channel or IEEE 1394B is required for on-board recorders; other network interfaces are optional. Ethernet is required for ground-based recorders; other network interfaces are optional. | |||
| LOGICAL INTERFACE REQUIREMENTS | |||
|---|---|---|---|
| Ch 10 Section | Required | Optional | Logical Interfaces |
| 10.5 | ✔ | Media File Interface | |
| 10.5 | ✔ | - Directory & File Table Entries | |
| 10.3.7 | ✔ | - STANAG fields - File Size, File Create Date, File Close Time | |
| 10.6 | ✔ | Packetization & Data Format | |
| 10.6.1 | ✔ | - Secondary header | |
| 10.6.1 | ✔ | - Filler for packet length | |
| 10.6.1 | ✔ | - Data checksum | |
| 10.6.1 | ✔ | - Intrapacket headers and time stamps | |
ch10_handbook/conformance_to_irig_106.txt · Last modified: 2014/05/29 14:43 by bob